Marshmallow depositor manifold tells: What are the operating precautions for mixing machine before use?

Do you know what the operating precautions of the Mixing machine are before use? Let's follow the editor of Marshmallow depositor manifold to have a simple understanding!
Before starting to use, it is necessary to run the test machine in a dry run to check whether there is any abnormality in the connection of each component in the Mixing machine, whether the operation of the electrical appliances can reach the normal state, and whether the bearing lubrication is in place. After the power is turned on, start the test machine. The dry-running test machine operates the Mixing machine without adding materials to ensure that the whole machine does not experience high heat of the bearing gear, abnormal noise during operation, and high temperature of the reducer during this process. Phenomenon, it can be officially put into use after confirming that it is correct.
When the mixing machine starts to start, the operating handle of the mixing drum should be placed in the "stop" position.
After starting, the mixing drum should be operated at low speed for 10 minutes, and then the hydraulic oil can be heated to above 20°C before it can enter the formal working process.
If the Mixing machine needs to be stored in the open air, before starting to load, the mixing drum should be reversed to remove all the accumulated water and debris inside, so as to ensure that the concrete achieves a higher quality of use.
When transporting concrete, the sliding bucket should be placed in a firm position to avoid the occurrence of rocking due to looseness.
When the concrete is shipped, the rotation speed of the mixing drum should reach 2 to 10 revolutions/min.
During the entire operation of the Mixing machine, the raw materials need to be metered and fed. When the powder or aggregate is put into the metering container or mixing drum, all the internal air needs to be removed. During the entire exhaust process, there will be small dusts that will rise. These dusts will not only put the working environment in a bad stage, but also directly cause damage to the Mixing machine and affect the service life of the machine.
Therefore, before operating and using the Mixing machine, you must pay more attention to the above contents, so as to help you use the mixing equipment better and more correctly, and after using the equipment, you must also do the relevant shutdown operations and treatments. , So as to better ensure the normal use of the next time.
The above is the story of Marshmallow depositor manifold editor: The operation precautions of Mixing machine before use, I hope you can learn more.