Do you know what is the inspection method for wholesale mixing machine before starting?

Before starting the wholesale mixing machine, in order to reduce the occurrence of accidents, a check must be carried out before starting. Do you know how to check it? Let’s take a look at it with the editor below!
1. It is necessary to check whether the connecting bolts of the wholesale mixing machine connected to the motor are loose. If there is any looseness, it should be firmed immediately, and it is not allowed to start with loose bolts.
2. Then check whether the gearbox is equipped with oil, whether the amount of oil is sufficient, whether the oil filling port is closed, and whether the breathing valve of the reducer body is intact.
3. Reconfirm that the horizontal error of the stirring shaft installation kettle is within the specified requirements. Excessive horizontal error will affect the swing of the stirring shaft.
4. The connection between the mixing transmission device and the installation surface of the mixing container needs to be firm and reliable. After the mixing transmission device and the wholesale mixing machine are installed, the radial runout of the shaft seal should be ensured, and there is no abnormal sound and jamming of the cranking after installation. Phenomenon occurs.
5. Check whether the solid bolts between the reducer and the mixing unit are firm.
In summary, the editor tells: You can learn more about the inspection knowledge of the wholesale mixing machine before starting.